a, For the completely inlet and exit of water, air and steam, we use the big pipeline and valves which is very close to the mold, reduce the waste of energy consumption, while improving running speed.
a, Adopting vertical vacuum system, with 4-6” large drain pipeline and long distant of condensation drainpipe, using vertical vacuum system on the top of the machine, equip with a big spraying system, which is spray the rising hot steam directly, greatly increased condensation rate. Thus, improve vacuum suction efficiency and achieve vacuum as main cooling instead of main water cooling (normally water cooling will be set only 8-12s). Enable the product of water percentage ≤10%, In addition, the spray header of the replacement and maintenance is very convenient.
a, All pressure adjustment are remote controlled by control box, such as cross steaming , Main steaming, Filling pressure, De-molding and air cooling pressure. It is easily operated. In addition, the hydraulic pressure can be also adjusted in touched screen according to different foaming area. The program also has many self-protection and alarm systems.
FROM: Hangzhou Fangyuan