Precautions EPS foam machine maintenance

The so-called EPS foam cutting machine is a kind of equipment for the processing of foam, sponge and other chemical industry required materials. At present, the laser is mainly used for cutting. Since the fine cutting of the laser beam is not easy to be deformed, the incision is smooth, and the edge is not ambiguous, it is currently used in various fields. Of course, in the process of using the foam cutting machine, it will inevitably lead to failure and need to be repaired. Now we will say the following precautions during maintenance.
Only those who know how to use the operation are allowed to work on repairing or replacing components! In order to prevent accidents or damage to machinery, the following principles must be observed during inspections:
1. When a fault occurs, disconnect the power and stop the machine;
2. When the machine can not be used normally, inquire about the manual and operation manual, determine the correct measures to be taken; before the inspection or replacement of components, you must first turn off the power.
3. The parts (components) removed during the inspection should be replaced with the same new parts (components) at the same place. The instruments used during the inspection must be calibrated.
4. It is forbidden to leave inflammables or metal objects in the electric cabinet or junction box;
5. Regularly check the cables and wires for damage to prevent leakage or electric shock.

 

Leave a Reply

Your email address will not be published. Required fields are marked *