EPS foam cutting machine works

The EPS foam cutting machine is light and strong with amazing cutting accuracy and repeatability. The heating wire/fan box is a place for fixing the heating wire. When cutting, the micro-fan is used to cool the heating wire, and a special spring is used to compensate the elongation of the heating wire after being heated. High-performance heating wire, this high-life alloy wire is made of nickel, chrome, cobalt, molybdenum and titanium. It is long in length and can speed up cutting and has a long life. The EPS cutter motion analysis processing software controls the fully automatic turntable so that it can cut rotating bodies such as cylinders and spheres. The side bracket is a fully automated tool controlled by EPS cutter motion analysis software that allows you to cut out all possible rotating bodies such as cylinders, small pillars and more. The material is mounted on a nail located on the nail plate.

The EPS foam cutting machine is light and strong, and has amazing cutting precision and repeatability. The electric heating wire/fan box is the place where the heating wire is fixed. When cutting, the micro-fan is used to cool the heating wire, and the electric heating is compensated by a special spring. The elongation of the silk after being heated

The EPS foam cutting machine is light and strong with amazing cutting accuracy and repeatability. The heating wire/fan box is a place for fixing the heating wire. When cutting, the micro-fan is used to cool the heating wire, and a special spring is used to compensate the elongation of the heating wire after being heated. High-performance heating wire, this high-life alloy wire is composed of nickel, chrome, cobalt, molybdenum and titanium. It is long-extendable, which can speed up the cutting speed and has a long life. The speed is not very fast, the amount of glue is relatively small, causing the raw material to be plasticized too much, and the particle material slips in the barrel, causing the screw speed to fluctuate, causing the extrusion pressure to fluctuate, resulting in temperature control imbalance. Therefore, before the start-up of the insulation extrusion board manufacturer, all preparations should be made to minimize the waiting time during the startup temperature rise process, and the replacement template should be fast and neat. If the screw of the equipment used is cooled by oil cooling, it is related to the setting of the instrument in the mold thermostat, the smoothness of the pipeline, and the oil quality. If the equipment (screw and barrel) is cooled by circulating water, scale and solenoid valve failure are the main factors.

Leave a Reply

Your email address will not be published. Required fields are marked *