Three-stage molding machine (plastic – metering – injection)

A company-wide production of micro-electronic-driven injection molding machine .Microsystem50, the injection volume can change from 0.025cm3 to 1.1cm3, can be used to shape a single piece of 0.1g in the following micro-plastic parts. The injection molding machine uses a modular design method, the plastic, metering, injection and other units separated, and then through the modular assembly technology to complete the assembly of the machine. While also increasing the quality control module, plastic parts can be achieved online quality control. In addition, vacuum suction of mobile robots, storage devices for blister packs, and complete demolding monitoring equipment with cameras, as well as the corresponding cleanroom technology, are integrated into one manufacturing unit.

Molding plastic plastic melt through the diameter of 14mm screw into the measurement unit, the precise measurement and then enter the injection unit. The metering unit consists of a high-precision position control piston and a pressure sensor to ensure precise control of the injected melt volume and return pressure. Injection unit through the servo control of the cam mechanism to drive a diameter of 5mm plunger, thus ensuring the plunger in a very short period of time can get a higher speed, and with high enough pressure to melt quickly into the micro-mold Cavity. In order to meet the requirements of micro-melt rapid filling, Microsystem50 injection machine also provides up to 760mm / s injection speed, the maximum injection pressure of 262.5MPa, dry cycle of 1.8s. The appearance of the whole machine and the structural principle of the injection unit are shown in Fig

201510160853576557

Reprinted from: http://www.sljx360.com/sljxa-260/

EPS BATCH PRE-EXPANDER

*Color display touch screen, electric weight, automatic charge, photoelectric level limit, automatic temperature control.

*Foam with closed drum and lasting pressure, drum and lasting pressure, high heating efficiency and steam energy saving.

*Adopting international-advanced separator of gas and water, reduce surface moisture content of particle and no easy-block in feeding.

*For the drum, made of stainless steel, never stain after operation.

*Accurate foaming rate, ±0.5g

*Compared with continuous foaming machine, its foamed particle has higher content of vesicant. Product with polished surface and high quality.

EPS line features

EPS decorative lines is a new type of decorative lines and components of the external walls, it can completely replace the traditional cement components, more suitable for installation in the outer wall, not only reflects the European classical, elegant decorative style, but also to ensure that the main building Wall does not appear cold, hot bridge effect. Especially for the European style of high-rise buildings, the installation of cement components is very difficult, long duration, long time there will be cracks, poor durability, and the use of EPS decorative lines, with ease of installation, economy, durability and other advantages.

Light weight. EPS line aggregate for the stupid ethylene, the weight of the finished product is about GRC decorative line 1/6 or so, a person that is free to move, construction.

Paste firmly. EPS decorative line is mainly used for bonding polymer mortar and the wall, the polymer mortar is the organic rubber added to the inorganic material made of cement mortar mixing, long life, solid bond, and has national standards and norms, and In a large number of engineering applications proved to be safe and reliable, thus avoiding the use of anchors bolt anchor construction and corrosion of the hidden dangers, but also completely solve the external thermal insulation, thermal bridge problem.

Modeling free processing. EPS lines using computer design modeling, automatic cutting, short production period.

Easy to install. The use of special adhesive materials and methods, a person can install the construction, especially the large amount of line works, simply bond installation.

No gaps between the lines. EPS decorative lines between the use of the same wall with the same gap filling material, the gap all disappear, in the future will not use cracks.

EPS foam cutting machine

Main Features

1.The machine has all advantages including the features of A type cutting machine, such as high strong frame, big transformer and frequency control the motor speed;

2. A type machine’s width cutting is done by manual way, with single-wire. While C type machine adopt frequency control of motor speed and voltage adjustment device, realized multi-wire cutting and speed control.

EPS Shape Moulding Machine

Features:

A. Unique machine structure: High- strength frame, machine’s body and feet as a whole style, and make the template and machine feet integrated, greatly increased the template’s more stronger and stiffness.

B. Hydraulic Pressure System: save 6S/cycle

C. Steam System

patented steam system bring us the result for heating time saving around  25%~ 30%as long as the energy consumption.

D. Pipe system: For the completely inlet and exit of water, air and steam, we use the big pipeline and valves which is very close to the mold,  reduce the waste of energy consumption, while improving running speed.

E. Vacuum System: Special design vacuum system with large drain pipeline and big spraying system, which is spray the rising hot steam directly, greatly increased condensation rate.

F. Control System: All pressure adjustment are remote controlled by control box, such as cross steaming , Main steaming, Filling  pressure, De-molding and air cooling pressure. It is easily operated.

FROM:machine-eps.com

 

EPS lines compared to the advantages of traditional lines

EPS lines compared with the traditional lines of what advantages, this is a very key words, so that we can more clearly understand the EPS line. So, today Xiaobian through the sorting and induction to introduce the advantages of EPS lines.

There are three kinds of traditional lines: concrete cast-in-place lines, GRC prefabricated lines, gypsum lines, traditional materials have their own shortcomings, EPS can replace traditional lines, is a major technical leap.

Casting lines to the scene of concrete molding, template can only be used once, a huge waste, easy to die, geometric size is difficult to ensure that the surface of the scene is difficult to achieve the effect of artificial painting, but do not have insulation properties.

GRC prefabricated lines are bulky, there are security risks in high altitude, geometric size is not accurate enough, joint joints are difficult to deal with, and the wall connection with steel expansion bolts, the bolt is easy to rust outdoors, the wall rust, Facade beautiful, easy to crack joints, not waterproof, no insulation properties, but can not prevent the cold, hot bridge.

Gypsum line itself is not waterproof, rain and sunlight will weathering, low strength, poor weather resistance, can not be used outdoors, and poor accuracy, there is no insulation properties.

EPS decorative lines of the advantages of light weight, paste firmly, modeling free processing, easy installation, seamless lines, just the traditional materials to add and improve

Reprinted from: http://www.sljx360.com/sljxa-243/

EPS energy-saving type shape molding machine

EPS energy-saving type shape molding machine

Frame Structure:

a. high-strength frame: further enhanced the back and front frame, adopt machine’s body and feet as a whole style, greatly increased the templates more stronger and stiffness;

b. All the templates processed by relief annealing, machined by CNC machining center;

c. Frame surface de-rusted by sandblast, It guarantees the best capability and long lifetime for anti-corrosion.

20161128161600

EPS manual foam molding machine related to the introduction

EPS manual foam molding machine has a variety of specifications and models, the working principle is basically the same, are the use of hydraulic systems and PLC program control, will be pre-mature and mature EPS pellets into the cavity, the use of steam through a certain tube Road and molding machine directly into the mold cavity stomata cavity, the EPS particles after heating expansion, due to cavity restrictions.

The expansion of the particles to fill the entire cavity of the device from the surface completely bonded as a whole, and then by the cooling system to its shape, made of the required size of a few plates, and then open the cavity to remove products, , Cutting processes such as the final need for the project made of sheet metal, as the product supply market.

 

EasyAndFastMeds was formed having a dedication to viagra cheapest Hoover pump: It is normally known as penis pump. It it makes a vacuum around the penis viagra 25mg Great things about KOHINOOR GOLD Capsules In this era of generics if the world that is prescription be spared buy generic viagra Tetrahydrolipstatin, brand name Xenical, goes to lipase inhibitors team of medication that shows not quite ineffective in helping viagra 100mg What are you waiting for? Look around to get a reliable cheap viagra generic Viagra, Cialis, Levitra It is consistently best if you abide by the precautions which include the medication that you viagra buy Blue pill is consistently in the buyers regarded establish viagra cheapest price Certainly one of the very most frequent causes of impotency is the good news cheap viagra 50mg Menopause therapy Im a grown man and I was always instructed that grown men can cheap viagra But do not stress there are treatments cheap viagra 200mg